Sepasoft 3.79.3 SP3 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP3 | MES 3.0 | Production | Supplemental Equipment and Manifests cannot be loaded into the cache used to load equipment by equipment path. | Fixed |
| 3.79.3 SP3 | MES 3.0 | Production | Added logging for failed Auto Start operations. | Fixed |
| 3.79.3 SP3 | MES 3.0 | Production | Updated error message to display correct module name. | Fixed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP3 | MES 3.0 | OEE Downtime | Exception no longer throws when running OEE Reject analysis on a Line that depends on Counts from child Equipment | Fixed |
| 3.79.3 SP3 | MES 3.0 | OEE Downtime | Fixed a regression that was causing the Line Standard Count and Line Target Count were the value could go above the Line Schedule Count | Fixed |
| 3.79.3 SP3 | MES 3.0 | OEE Downtime | Synthesized Reject totalization for Line-level analysis, where Infeed/Outfeed counters are provided by the Line during ungrouped Analysis. | Fixed |
| 3.79.3 SP3 | MES 3.0 | OEE Downtime | Synthesized Reject totalization for Cell-level analysis, where Infeed/Outfeed counters are provided by the Cell during ungrouped Analysis. | Fixed |
| 3.79.3 SP3 | MES 3.0 | OEE Downtime | Synthesized Reject totalization for Line-level analysis, where Infeed/Outfeed counts are provided by Cell counters during ungrouped Analysis. | Fixed |
| 3.79.3 SP3 | MES 3.0 | OEE Downtime | Child Equipment with differing Package Counts than the Line would cause the Line’s Package count to get overwritten in Analysis. | Fixed |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP3 | MES 3.0 | Track & Trace | When executing segments immediately the objects that are saved will not bypass the Enterprise syncing step. | Fixed |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP3 | MES 3.0 | SPC | No updates for this module in this service pack. |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP3 | MES 3.0 | Settings & Changeover | Tracking UUIDs will no longer be queried twice upon deleting an Equipment item, causing an unavoidable Exception to be thrown. | Fixed |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP3 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.1 SP4 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.1 SP4 | Business Connector and Web Services | Web Services | Improved the way we load configuration resources. | Fixed |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.1 SP4 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP2 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP2 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP2 | MES Utility | Production Simulator | No updates for this module in this service pack. |
Sepasoft 3.79.3 SP1 Release Notes
MES Platform 3.0
Production Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES 3.0 | Production | Lines that are NOT currently running operations will no longer complain about having their properties edited while they are running. | Fixed |
| 3.79.3 SP1 | MES 3.0 | Production | Several Equipment properties are now editable during running operations. Properties include Description, Cell Order, Live Analysis, SubProductCodeMask (S&C), and InheritRecipeValuesMode (S&C). | Improvement |
| 3.79.3 SP1 | MES 3.0 | Production | When calling system.mes.purgeRequestAndResponseObjects(), only the lots specified by the Data Retention Cutoff Date will be loaded instead of the entire database table entries. | Fixed |
OEE Downtime Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | The following analysis data points no longer throw Exceptions on use: Equipment Operation Original Begin, Equipment Operation Original End, Equipment Operation Scheduled Begin, Equipment Operation Scheduled End. | Fixed |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | Equipment Manager will show roles not assigned to user but on the Mode Class Security or State Class Security in read-only mode. | Fixed |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | Changing the duration or count of an active operation that started from a schedule will update the Equipment Schedule Count or Equipment Schedule Duration. | Fixed |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | Equipment Note filtering for Analysis is now functional. | Fixed |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | New ‘Theoretical Outfeed Standard Count’ that is calculated by (Standard Rate * Elapsed Time). | Added |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | New ‘Theoretical Infeed Standard Count’ that is calculated by (Standard Rate * Elapsed Time * Package Count). | Added |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | New ‘Theoretical OEE Availability’ that is calculated by ((Elapsed Time – Unplanned Downtime) / Elapsed Time). | Added |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | New ‘Theoretical OEE Performance’ that is calculated by (OEE Infeed Count / Theoretical Infeed Standard Count). | Added |
| 3.79.3 SP1 | MES 3.0 | OEE Downtime | New ‘Theoretical OEE’ that is calculated by (Theoretical OEE Availability * Theoretical OEE Performance * OEE Quality) Fixed – Changing the duration or count of an active operation that started from a schedule will update the Equipment Schedule Count or Equipment Schedule Duration. |
Added |
Track & Trace Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES 3.0 | Track & Trace | No updates for this module in this service pack. |
Statistical Process Control Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES 3.0 | SPC | No updates for this module in this service pack. |
Settings & Changeover Module (Formerly Recipe & Changeover)
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES 3.0 | Settings & Changeover | No updates for this module in this service pack. |
Document Management Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES 3.0 | Document Management | No updates for this module in this service pack. |
Sepasoft Business Connector Suite
Sepasoft Business Connector Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.1 SP4 | Business Connector and Web Services | Business Connector | No updates for this module in this service pack. |
Web Services Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.1 SP4 | Business Connector and Web Services | Web Services | Improved the way we load configuration resources. | Fixed |
Interface for SAP ERP Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.1 SP4 | Business Connector and Web Services | Interface for SAP ERP | No updates for this module in this service pack. |
MES Utility Modules
Instrument Interface Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES Utility | Instrument Interface | No updates for this module in this service pack. |
Barcode Scanner Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES Utility | Barcode Scanner | No updates for this module in this service pack. |
Production Simulator Module
| Rev | Platform | Module | Change Log | Change Type |
| 3.79.3 SP1 | MES Utility | Production Simulator | No updates for this module in this service pack. |