Module Downloads & Release Notes
Sepasoft Modules
Downloads & Release Notes
PLEASE NOTE: Ignition® must be installed in order to use Sepasoft modules. Download here.
We have changed the versioning scheme for our modules for Ignition.
The new scheme is as follows:
MES Platform (dot) Ignition Version (dot) Minor Revision
For example, users of MES Platform 3 modules who are using Ignition 8 should download the 3.80.x modules, whereas users of MES Platform 2 modules on Ignition 7.9 should download the 2.79.x modules.
- Select the appropriate Ignition version tab below.
- Expand the folder for the desired Sepasoft modules.
- Click to download the modules individually.
WARNING
If you are upgrading from any Platform 1.0 modules, please contact Support for assistance.
IMPORTANT
It is recommended that users run the Ignition version listed in the ‘Highest Tested Ignition Version’, next to each downloadable module.
These modules are for use with Ignition 8.1
WARNING
If you are upgrading to Ignition 8 from any previous version of Ignition you must read the upgrade guide first before installing Ignition 8.
BACK UP YOUR GATEWAY/PROJECT(S) BEFORE PROCEEDING!
Visit the following URLs for more information before installing:
- Ignition 8 upgrade guide: Ignition 8 Upgrade Guide
- MES Ignition 8 upgrade process: Ignition 8 Project Setup
- MES 3.0 upgrade guide: Installation Guide
+ MES Platform 3 Perspective Release Candidate
WARNING
If you are upgrading from Sepasoft Platform 2 to Platform 3, please see the Installation Guide.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Production Module | 3.81.1 RC1 | 8.1.1 | Required for OEE and T&T Modules. |
| OEE Downtime | 3.81.1 RC1 | 8.1.1 | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | 3.81.1 RC1 | 8.1.1 | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Settings & Changeover | TBD | TBD | The Sepasoft Settings & Changeover Module (formerly Recipe & Changeover) provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | TBD | TBD | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
| Document Management | TBD | TBD | The Document Management Module empowers manufacturers to manage, distribute, and view SOP (Standard Operating Procedures), MSDS (Material Safety Data Sheets), quality documents, checklists, and much more without the typical difficulties.. |
+ MES Platform 3
WARNING
If you are upgrading from Sepasoft Platform 2 to Platform 3, please see the Installation Guide.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Production Module | TBD | TBD | Required for OEE and T&T Modules. |
| OEE Downtime | TBD | TBD | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | TBD | TBD | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Settings & Changeover | TBD | TBD | The Sepasoft Settings & Changeover Module (formerly Recipe & Changeover) provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | TBD | TBD | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
| Document Management | TBD | TBD | The Document Management Module empowers manufacturers to manage, distribute, and view SOP (Standard Operating Procedures), MSDS (Material Safety Data Sheets), quality documents, checklists, and much more without the typical difficulties.. |
+ MES Platform 2
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Production Module | 2.81.0 SP4 | 8.1.1 | Required for OEE, T&T, SPC, and Recipe Modules. |
| OEE Downtime | 2.81.0 SP4 | 8.1.1 | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | 2.81.0 SP4 | 8.1.1 | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Recipe & Changeover | 2.81.0 SP4 | 8.1.1 | The Sepasoft Recipe & Changeover Module provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | 2.81.0 SP4 | 8.1.1 | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
+ Business Connector
WARNING
If you are upgrading from Sepasoft Platform 2 to Platform 3, please see the Installation Guide.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Sepasoft Business Connector | TBD | TBD | The Sepasoft Business Connector Module enables you to send and retrieve data in real time to higher-level business systems like Enterprise Resource Planning systems and Advanced Planning Systems. |
| Interface for SAP ERP | TBD | TBD | The Interface for SAP ERP module enables the Sepasoft Business Connector to communicate natively with on-prem SAP servers. |
| Web Services | TBD | TBD | The Sepasoft Web Services Utility Module allows you to easily configure web service operations and data types visually, then invoke web service operations from the HMI, SCADA, or MES system to read data from or write data to ERP or any other system that supports web services. |
+ Utilities
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Instrument Interface | 2.81.0 FR | 8.1.1 | The Sepasoft Instrument Interface Utility Module will let you capture raw textual data from instrument type devices via serial, text files, OPC devices, and more, enabling you to parse out the meaningful values that can be saved to databases or passed along to other systems. |
| Barcode Scanner | 2.81.0 FR | 8.1.1 | The Sepasoft Barcode Utility Module allows you to use barcode scanning capabilities to facilitate material handling, scan a badge to sign off on materials, Master Production Records, Batch Production Records, and other production tasks. Barcode Scanner also includes the ability to hide manufacturing records not in use and has an added option for customers to include their own logos. |
| Production Simulator | 2.81.0 FR | 8.1.1 | The Sepasoft Production Simulator is a free module that enables the configuration of simple equipment to simulate a simple factory floor. Infeed, outfeed, and waste counts, as well as equipment state values and additional factors can be furnished by the Production Simulator for the purpose of OEE Downtime proof of concept and testing. |
Release Notes for all modules on this page are here.
These modules are for use with Ignition 8.0
WARNING
If you are upgrading to Ignition 8 from any previous version of Ignition you must read the upgrade guide first before installing Ignition 8.
BACK UP YOUR GATEWAY/PROJECT(S) BEFORE PROCEEDING!
Visit the following URLs for more information before installing:
- Ignition 8 upgrade guide: Ignition 8 Upgrade Guide
- MES Ignition 8 upgrade process: Ignition 8 Project Setup
- MES 3.0 upgrade guide: Installation Guide
+ MES Platform 3
WARNING
If you are upgrading from Sepasoft Platform 2 to Platform 3, please see the Installation Guide.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Production Module | 3.80.0 RC3 | 8.0.16 | Required for OEE and T&T Modules. |
| OEE Downtime | 3.80.0 RC3 | 8.0.16 | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | 3.80.0 RC3 | 8.0.16 | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Settings & Changeover | TBD | TBD | The Sepasoft Settings & Changeover Module (formerly Recipe & Changeover) provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | TBD | TBD | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
| Document Management | 3.80.0 RC3 | 8.0.16 | The Document Management Module empowers manufacturers to manage, distribute, and view SOP (Standard Operating Procedures), MSDS (Material Safety Data Sheets), quality documents, checklists, and much more without the typical difficulties.. |
+ MES Platform 2
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Production Module | 2.80.0 SP2 | 8.0.16 | Required for OEE, T&T, SPC, and Recipe Modules. |
| OEE Downtime | 2.80.0 SP2 | 8.0.16 | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | 2.80.0 SP2 | 8.0.16 | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Recipe & Changeover | 2.80.0 SP2 | 8.0.16 | The Sepasoft Recipe & Changeover Module provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | 2.80.0 SP2 | 8.0.16 | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
+ Business Connector
WARNING
If you are upgrading from Sepasoft Platform 2 to Platform 3, please see the Installation Guide.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Sepasoft Business Connector | 3.80.0 SP1 | 8.0.??? | The Sepasoft Business Connector Module enables you to send and retrieve data in real time to higher-level business systems like Enterprise Resource Planning systems and Advanced Planning Systems. |
| Interface for SAP ERP | 3.80.0 SP1 | 8.0.??? | The Interface for SAP ERP module enables the Sepasoft Business Connector to communicate natively with on-prem SAP servers. |
| Web Services | 3.80.0 SP1 | 8.0.??? | The Sepasoft Web Services Utility Module allows you to easily configure web service operations and data types visually, then invoke web service operations from the HMI, SCADA, or MES system to read data from or write data to ERP or any other system that supports web services. |
+ Utilities
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Instrument Interface | 2.80.0 SP1 | 8.0.??? | The Sepasoft Instrument Interface Utility Module will let you capture raw textual data from instrument type devices via serial, text files, OPC devices, and more, enabling you to parse out the meaningful values that can be saved to databases or passed along to other systems. |
| Barcode Scanner | 2.80.0 SP1 | 8.0.??? | The Sepasoft Barcode Utility Module allows you to use barcode scanning capabilities to facilitate material handling, scan a badge to sign off on materials, Master Production Records, Batch Production Records, and other production tasks. Barcode Scanner also includes the ability to hide manufacturing records not in use and has an added option for customers to include their own logos. |
| Production Simulator | 2.80.0 SP1 | 8.0.??? | The Sepasoft Production Simulator is a free module that enables the configuration of simple equipment to simulate a simple factory floor. Infeed, outfeed, and waste counts, as well as equipment state values and additional factors can be furnished by the Production Simulator for the purpose of OEE Downtime proof of concept and testing. |
Release Notes for all modules on this page are here.
These modules are for use with Ignition 7.9
+ MES Platform 3
WARNING
If you are upgrading from Sepasoft Platform 2 to Platform 3, please see the Installation Guide.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Production Module | 3.79.0 RC3 | 7.9.16 | Required for OEE and T&T Modules. |
| OEE Downtime | 3.79.0 RC3 | 7.9.16 | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | 3.79.0 RC3 | 7.9.16 | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Settings & Changeover | TBD | TBD | The Sepasoft Settings & Changeover Module (formerly Recipe & Changeover) provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | TBD | TBD | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
| Document Management | 3.79.0 RC3 | 7.9.16 | The Document Management Module empowers manufacturers to manage, distribute, and view SOP (Standard Operating Procedures), MSDS (Material Safety Data Sheets), quality documents, checklists, and much more without the typical difficulties.. |
+ MES Platform 2
Note: Version 2.79.0 is for Ignition platform 7.9.4 to 7.9.x. Our 2.79.0 modules are not compatible with Ignition 8. Please visit the “Ignition 8.1” or the “Ignition 8.0” tab to download available Ignition 8 compatible modules.
The MES 2.0 platform release contains the new OEE 2.0 module. All other modules maintain the same functionality as their MES 1.0 counterparts but have been modified to work on the new platform. The Web Services, Barcode Scanner, Instrument Interface and Production Simulator modules from the MES 1.0 suite can be installed alongside these MES 2.0 modules. All other modules need to be upgraded to the 2.0 version. If you are upgrading from any of the MES 2.0 versions, please restart your Gateway after install.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Production Module | 2.79.0 SP4 | 7.9.16 | Required for OEE, T&T, SPC, and Recipe Modules. |
| OEE Downtime | 2.79.0 SP4 | 7.9.16 | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | 2.79.0 SP4 | 7.9.16 | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Recipe & Changeover | 2.79.0 SP4 | 7.9.16 | The Sepasoft Recipe & Changeover Module provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | 2.79.0 SP4 | 7.9.16 | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
| Web Services | 2.79.0 SP4 | 7.9.16 | The Sepasoft Web Services Utility Module allows you to easily configure web service operations and data types visually, then invoke web service operations from the HMI, SCADA, or MES system to read data from or write data to ERP or any other system that supports web services. |
+ MES Platform 1
WARNING
If you are upgrading from any Platform 1.0 modules, please contact Support for assistance.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| OEE Downtime | 1.9.5 SP7 | 7.9.11 | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | 1.9.5 SP7 | 7.9.11 | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Recipe & Changeover | 1.9.5 SP7 | 7.9.11 | The Sepasoft Recipe & Changeover Module provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | 1.9.5 SP7 | 7.9.11 | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
| Web Services | 1.9.5 SP7 | 7.9.11 | The Sepasoft Web Services Utility Module allows you to easily configure web service operations and data types visually, then invoke web service operations from the HMI, SCADA, or MES system to read data from or write data to ERP or any other system that supports web services. |
| Instrument Interface | 1.9.5 SP7 | 7.9.11 | The Sepasoft Instrument Interface Utility Module will let you capture raw textual data from instrument type devices via serial, text files, OPC devices, and more, enabling you to parse out the meaningful values that can be saved to databases or passed along to other systems. |
| Barcode Scanner | 1.9.5 SP7 | 7.9.11 | The Sepasoft Barcode Utility Module allows you to use barcode scanning capabilities to facilitate material handling, scan a badge to sign off on materials, Master Production Records, Batch Production Records, and other production tasks. Barcode Scanner also includes the ability to hide manufacturing records not in use and has an added option for customers to include their own logos. |
| Production Simulator | 1.9.5 SP7 | 7.9.11 | The Sepasoft Production Simulator is a free module that enables the configuration of simple equipment to simulate a simple factory floor. Infeed, outfeed, and waste counts, as well as equipment state values and additional factors can be furnished by the Production Simulator for the purpose of OEE Downtime proof of concept and testing. |
+ MES Platform 1 (LTS)
WARNING
If you are upgrading from any Platform 1.0 modules, please contact Support for assistance.
| MES Module | Module Version (Click to Download) | Description |
| OEE Downtime | 1.7.9 | The Sepasoft OEE Downtime Module empowers manufacturers with actionable data that can help managers reduce operating cost, increase asset utilization, and boost operating efficiency that results in improved profitability. |
| Track & Trace | 1.7.9 | The Sepasoft Track & Trace Module manages your inventory in real time. Your system can have the capability to look up where any product has been during its manufacturing process, and where it is now. It records the start and end of each production run in real-time and monitors the status of the materials while being consumed. |
| Recipe & Changeover | 1.7.9 | The Sepasoft Recipe & Changeover Module provides an efficient means to manage and select recipes, track variances in recipe values, keep recipes secure, track recipe changes, analyze recipes, and generate recipe reports. |
| SPC | 1.7.9 | The Sepasoft SPC Module will help you reduce or eliminate late or missing sample collection, inaccurate sample data, and other issues leading to quality problems. |
| Web Services | 1.7.9 | The Sepasoft Web Services Utility Module allows you to easily configure web service operations and data types visually, then invoke web service operations from the HMI, SCADA, or MES system to read data from or write data to ERP or any other system that supports web services. |
| Instrument Interface | 1.7.9 | The Sepasoft Instrument Interface Utility Module will let you capture raw textual data from instrument type devices via serial, text files, OPC devices, and more, enabling you to parse out the meaningful values that can be saved to databases or passed along to other systems. |
| Barcode Scanner | 1.7.9 | The Sepasoft Barcode Utility Module allows you to use barcode scanning capabilities to facilitate material handling, scan a badge to sign off on materials, Master Production Records, Batch Production Records, and other production tasks. Barcode Scanner also includes the ability to hide manufacturing records not in use and has an added option for customers to include their own logos. |
| Production Simulator | 1.7.9 | The Sepasoft Production Simulator is a free module that enables the configuration of simple equipment to simulate a simple factory floor. Infeed, outfeed, and waste counts, as well as equipment state values and additional factors can be furnished by the Production Simulator for the purpose of OEE Downtime proof of concept and testing. |
+ Business Connector
WARNING
If you are upgrading from Sepasoft Platform 2 to Platform 3, please see the Installation Guide.
The Business Connector module is available for use in MES platform 3 and MES Platform 2. However, when used with MES Platform 2, the functionality related to manipulating MES Objects, such as the Verify MES Object and Save MES Object blocks, will not be available for use.
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Sepasoft Business Connector | 3.79.0 | 7.9.16 | The Sepasoft Business Connector Module enables you to send and retrieve data in real time to higher-level business systems like Enterprise Resource Planning systems and Advanced Planning Systems. |
| Interface for SAP ERP | 3.79.0 | 7.9.16 | The Interface for SAP ERP module enables the Sepasoft Business Connector to communicate natively with on-prem SAP servers. |
| Web Services | 3.79.0 | 7.9.16 | The Sepasoft Web Services Utility Module allows you to easily configure web service operations and data types visually, then invoke web service operations from the HMI, SCADA, or MES system to read data from or write data to ERP or any other system that supports web services. |
+ Utilities
| MES Module | Module Version (Click to Download) | Highest Tested Ignition Version | Description |
| Instrument Interface | 2.79.0 | 7.9.16 | The Sepasoft Instrument Interface Utility Module will let you capture raw textual data from instrument type devices via serial, text files, OPC devices, and more, enabling you to parse out the meaningful values that can be saved to databases or passed along to other systems. |
| Barcode Scanner | 2.79.0 | 7.9.16 | The Sepasoft Barcode Utility Module allows you to use barcode scanning capabilities to facilitate material handling, scan a badge to sign off on materials, Master Production Records, Batch Production Records, and other production tasks. Barcode Scanner also includes the ability to hide manufacturing records not in use and has an added option for customers to include their own logos. |
| Production Simulator | 2.79.0 | 7.9.16 | The Sepasoft Production Simulator is a free module that enables the configuration of simple equipment to simulate a simple factory floor. Infeed, outfeed, and waste counts, as well as equipment state values and additional factors can be furnished by the Production Simulator for the purpose of OEE Downtime proof of concept and testing. |
+ Archived Platform 1 Modules
Release Notes for all modules on this page are here.
Additional Information
The Track & Trace, OEE Downtime, Settings & Changeover (called Recipe & Changeover in Platform 2 or Platform 1), and SPC modules require the installation of the Production module. All modules must be in the same version!
The Sepasoft MES software development life cycle (SDLC) is as follows: Beta > Release Candidate > Full Release > Service Pack
- Beta: Version that has not yet passed our Test/QA process and is therefore not ready for a production environment. We provide this version as an opportunity for end users to test in a development environment.
- Release Candidate: Version has passed through our Test/QA process and is considered to be stable enough to be used in development and production.
- Full Release: Version follows the Release Candidate version and may include any minor fixes reported or found.
- Service Pack: Consists of minor updates to the Full Release version.